Siemens Sinorix al-deco STD Operating Handbook page 11

Flashing light/ Acoustic alarm
Der
2
Data storage unit + USB
Der
Manual start with pressure indicator
Building Technologies
Fire Safety
If the systems starts to extinguish a fire, the flashing light (1) on the
1
communication interface lights up and an acoustic signal (2) sounds. If
the remaining amount of extinguisher falls below 70% of the full level,
the flashing light will light up every 60 minutes for 8 seconds (see
Chapter „5 What happens when there's a fire?").
The data specific to the system and data regarding services and refills
is stored in the Communication Interface. In addition, all safety relevant
data is recorded in a data storage unit (Black-Box). All this data can be
read out with a laptop at any time using a USB interface
In order to also be able to start the extinguisher system manually, a
Manual Start is fitted near the operating panel of the machine tool (see
„System started (fire alarm)").
Description of the extinguisher system
A54475-A1-A2_EN_05.docx
11
01.2018