SonicWALL TZ 150 Getting Started Manual page 8

If the SonicWALL Setup Wizard Does Not Appear
If you cannot connect to the SonicWALL TZ 150 or the Setup
Wizard does not display, verify the following configurations:
• Did you correctly enter the SonicWALL TZ 150 management
IP address in your Web browser?
• Is your computer running pop-up blocking software?
• Are the Local Area Connection settings on your computer set
to obtain an IP address dynamically (DHCP)? see Step 7,
Connecting Computers to Your Appliance on page 25 for
instructions on changing your Local Area Connection
settings.
• Do you have the Ethernet cable connected to your computer
and to the LAN 1 port on your SonicWALL TZ 150?
• Some browsers may not launch the Setup Wizard
automatically. In this case, log into SonicWALL TZ 150 using
"Admin" as the user name and "password" as the password.
After you log in, click the Wizards button on the
System > Status page. Select Setup to begin configuring
your SonicWALL TZ 150.
SonicWALL TZ 150 Getting Started Guide Page 7