SonicWALL TZ 150 Getting Started Manual page 10

2. Change Time Zone - Change the Time Zone setting to your
local time zone.
Time Zone
Automatically
adjust clock for
daylight saving time
Note: It is important that you set the time zone correctly before
you register your SonicWALL TZ 150.
Click Next.
3. WAN Network Mode - The Setup Wizard automatically detects
most networking modes. If it does not detect a networking mode,
you may have a static IP address.
See Procedure 1, Collect Required Information on page 3.
Select the correct type of network connection for your network.
Static IP
DHCP
PPPoE
PPTP
Click on the yellow link for a networking type to see a definition.
Click Next.
Select the time zone for your location from
the list.
Check this setting if you live in an area
that observes Daylight Saving Time.
Select Static IP if you want to give the
SonicWALL TZ 150 a specific, unchang-
ing IP address.
Select DHCP if your ISP assigns your
computer a dynamic IP address. DHCP is
commonly used with cable modems.
Select PPPoE if your ISP requires a user-
name and password to establish a con-
nection and assign a dynamic address.
PPPoE is commonly used with DSL.
Select PPTP if you dial into a specific
server and log into a VPN to establish a
connection.
SonicWALL TZ 150 Getting Started Guide Page 9