Kompernass KH 4406 Operating Instructions Manual page 8

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Notice: The Paper Shredder is fitted
with a safety stop: If the waste re-
t
ceptacle
is not inserted, or is not
correctly inserted, the paper shred-
der will not start. In this case, posi-
tion the waste receptacle
ly. When the green LED glows you
can operate the Paper Shredder as
usual.
Inserting paper:
• Insert paper from above and in portrait
format into the cutter opening
The motor starts automatically and swit-
ches itself off automatically if no further
paper is inserted. You can shred up to 15
sheets (80g/m
-Paper) at the same time.
2
Inserting credit cards:
• Insert the credit card from above into
the middle of the cutter opening
You can only shred one credit card at
a time.
Notice: Always insert the credit card
into the middle of the cutter ope-
e
ning
. Otherwise, the shredding
process will not start!
Inserting a CD:
• Insert the CD from above into the
middle of the cutter opening
You can only shred one CD at a time.
Notice: Always insert the CD into
the middle of the cutter opening
Otherwise, the shredding process
will not start!
Clearing a material blockage:
• Press and hold the switch
become jammed.
The appliance now goes into reverse
t
correct-
and the material to be shredded is
returned.
• Release the switch
items to be shredded are ejected.
Switching the appliance off:
• To switch the appliance off, move the
e
.
switch
(OFF).
Emptying the waste container:
• Pull the waste receptacle
from the roller container
• Empty the waste receptacle
e
.
regular intervals. At the latest when
shredded material is visible in the
viewing window
receptacle
• Remove shredded paper from the
waste receptacle
CDs, DVDs or credit cards.
• Dispose of the waste material in an
environmentally responsible manner.
Notice regarding overheating of the
e
.
appliance:
If it overheats, the appliance switches
itself off automatically. The red LED
glows should there still be material in
e
.
the cutter opening
• Empty the waste receptacle
shredded material is visible through
the viewing window
• Allow the appliance to cool down.
- 6 -
should the items to be shredded
w
w
into the middle position
Attention! Remove the power plug
from the wall socket.
r
of the waste
t
.
t
before shredding
e
.
Attention! Remove the power plug
from the wall socket.
w
in position
as soon as the
t
forwards
y
to empty it.
t
at
t
if
r
.

Advertisement

Table of Contents
loading

Table of Contents