Troubleshooting - Kompernass KH 4406 Operating Instructions Manual

Troubleshooting

If the material to be shredded jams:
This means that you have attempted to
feed too much material into the appliance
(max. 15 sheets 80g/m
credit card, max. 1 CD/DVD).
• Press and hold the switch
should the items to be shredded
become jammed.
The appliance now goes into reverse
and the material to be shredded is
returned.
• Release the switch
items to be shredded are ejected.
If the appliance suddenly ceases opera-
tion:
This means that the appliance has over-
heated and the automatic safety cut-out
has activated itself. The red LED glows.
Attention! Remove the power plug
from the wall socket.
• Allow the appliance to cool down.
• Replace the power plug into the wall
socket.
• Switch the appliance on, in that the
w
switch is placed in the position
If the appliance doesn`t allow itself to
be switched on:
• Check to see that the power plug is
correctly inserted into the wall socket.
• Try out a different wall socket.
• The appliance is probably defective.
Arrange for the appliance to be in-
spected by a qualified specialist.
paper, max. 1
2
w
in position
w
as soon as the
.
When the appliance is switched on,
however, the shredding process will
not start:
The waste receptacle
positioned.
• Position the waste receptacle
rectly.
The appliance has overheated and the
automatic safety cut-out has activated
itself. The red LED glows when you try
to insert material for shredding into the
cutter opening
Attention! Remove the power plug
from the wall socket.
• Allow the appliance to cool down.
• Replace the power plug into the
socket.
• Switch the appliance on, in that the
w
switch is placed in the position
The cutter attachment
placed.
• Place the cutting attachment
correct position.
- 8 -
t
is not properly
t
e
.
q
is not correctly
q
cor-
.
in the