Milwaukee HOBL 7000 Operator's Manual page 4

WARNING
To reduce the risk of injury, do not look directly into the light when the light is on.
Use the hanging cable to secure the light in an overhead position. To use, feed the cable into the cable
clamp. Pull the free end of the cable to tighten. Ensure the cable is fully seated in the cable clamp
before use.
To turn the light on or off, plug into AC power.
WARNING
To reduce the risk of injury, always unplug the light before performing any
maintenance. Never disassemble the light. Contact a MILWAUKEE
repairs.
Keep your light in good repair by adopting a regular maintenance program. If the light does not work
properly, return the light to a MILWAUKEE
The light source contained in this luminaire shall only be replaced by the manufacturer or his service
agent or a similar qualified person.
WARNING
To
never immerse your light in liquid or allow a liquid to flow inside it.
Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use only mild soap
and a damp cloth to clean, since certain cleaning agents and solvents are harmful to plastics and other
insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or
combustible solvents around lights.
WARNING
For a complete listing of accessories, go online to
www.milwaukeetools.com.au/
www.milwaukeetools.co.nz or contact a distributor.
Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to
product sold in Australia and New Zealand.
MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® .
Your satisfaction with our products is very important to us! If you encounter any problems with the
operation of this tool, please contact your authorised MILWAUKEE ® dealer.
For a list of MILWAUKEE ® dealers, guarantee or service agents please contact MILWAUKEE ®
Customer Service or visit our website.
(Australia Toll Free Telephone Number 1300 645 928)
(New Zealand Toll Free Telephone Number 0800 279 624)
or visit www.milwaukeetools.com.au / www.milwaukeetools.co.nz.
Professionally Made in China for Milwaukee Tool (Australia) / Milwaukee Tool (New Zealand)
reduce the risk
Use only recommended accessories. Others may be hazardous.
WARRANTY - AUSTRALIA and NEW ZEALAND
SERVICE - AUSTRALIA and NEW ZEALAND
Milwaukee Electric Tool Corporation
13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005
Milwaukee Tool (Australia)
21 Kelletts Road, Rowville, VIC 3178
Milwaukee Tool (New Zealand)
Auckland, 2022, New Zealand
Designed by Milwaukee Electric Tool Corp.
OPERATION
Using the Light
MAINTENANCE
Maintain Light
®
service facility for repairs.
of personal injury
Cleaning
ACCESSORIES
Melbourne, Australia
2 Landing Drive, Mangere
Printed in China
®
service facility for ALL
electric shock and damage,