Basic Control; Troubleshooting; Specifications - Pioneer X-SMC01-K Quick Start Manual

Basic control

STANDBY/ON OPEN/CLOSE
1
CD USB TUNER AUDIO IN
2
CLOCK/TIMER
BT AUDIO
EQUALIZER
1 2 3
P.BASS
3
4 5 6
BASS/TREBLE
7 8 9
RANDOM
CLEAR REPEAT
0
DISPLAY FOLDER
TUNE+
4
ENTER
MENU
/PROGRAM
PRESET VOLUME
TUNE–
+
MUTE
–
5
DIMMER
6
RDS
ST/MONO ASPM PTY
OPTION

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component,
l "Troubleshooting". Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks l
dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to
return to normal operating conditions.

Specifications

• Amplifier section
RMS Power Output: . . . . . . . . . . . . . 10 W + 10 W
(1 kHz, 10 %, T .H .D ., 8 Ω)
• Tuner section
Frequency Range (FM) . . . .87 .5 MHz to 108 MHz
Antenna Input (FM) . . . . . . . . . . 75 Ω unbalanced
• Bluetooth (X-SMC01BT only)
Version
. . . . . . . . . Bluetooth Specification Ver . 2 .1 + EDR
Output . . . . . . . . . Bluetooth Specification Class 2
4
En
Switches the unit between standby and on
7
Press  STANDBY/ON ( 1 ).
Setting the clock
SLEEP
1. Press CLOCK/TIMER ( 8 ) and ENTER ( 4 ).
8
2. Use k/l and ENTER ( 4 ) to set the day, hour and minute.
Setting the timer
9
1. Press CLOCK/TIMER ( 8 ).
2. Use k/l and ENTER ( 4 ) to adjust the day of the week and time.
Control the display brightness
10
Press DIMMER ( e ) to switch the display brightness in four steps.
11
Control sound and adjust volume
 Press EQUALIZER, P.BASS, BASS or TREBLE ( 9 ) to adjust sound quality.

 Press VOLUME +/– ( d ) to adjust the listening volume. 
12
 Press MUTE ( 5 ) to mute the sound. 
MEMORY
Playing iPod/iPhone/iPad or USB device using the USB terminal
1. Press USB ( 2 ) and connect your iPod/iPhone/iPad to the USB terminal.
2. Press d/ ( 6 ) to start playback.
+
13
Listening to the audio CD
–
1. Press CD ( 2 ).
14
2. Press OPEN/CLOSE ( 7 ) to open disc door and set a disc.
3. Press d/ ( 6 ) to start playback. Use numeric buttons ( 3 ) or o/p ( 6 ) to select the track.
DISPLAY
4. Press REPEAT ( b ) or RANDOM ( a ) to adjust the play mode.
Listening to the radio
1. Press TUNER ( 2 ).
2. Press TUNE +/– ( c ) to tune in to the desired station.
Bluetooth® audio playback (X-SMC01BT only)
1. Press BT AUDIO ( 2 ).
2. Turn on the power to the Bluetooth capable device that you wish to pair with, and perform pairing
procedure on it.
l
"Pairing with the unit (Initial registration)"
Estimated line-of-sight transmission distance*
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About 10 m
Frequency range . . . . . . . . . . . . . . . . . . . . 2 .4 GHz
Modulation . . . . . . . . . . . . . . . . . . . . . . . . . . FH-SS
Supported Bluetooth profiles . . . . . A2DP , AVRCP
Supported Codec . . . . . . . .SBC (Subband Codec)
Supported contents protection . . . . . . . . SCMS-T
* The line-of-sight transmission distance is
an estimate . Actual transmission distances
supported may differ depending on
surrounding conditions .
"Troubleshooting", ask your nearest Pioneer authorized service center or your
(Frequency Hopping Spread Spectrum)
• Miscellaneous
USB terminal . . . . . . . . . . . . . . . . . . . . . . 5 V, 2 .1 A
Power source . . . . AC 100 V to 240 V, 50 Hz/60 Hz
Power consumption
Power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 W
Power stand-by . . . . . . . . . . . . . . . . . 0 .5 W or less
Power stand-by (BT STANDBY ON)*
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 .5 W or less
*X-SMC01BT only
Dimensions
. . . . . . . 430 mm (W) x 218 mm (H) x 114 mm (D)
Weight (without package) . . . . . . . . . . . . . . .2 .8 kg
© 2013 PIONEER CORPORATION.
All rights reserved.