Advertisement
Important Safety
Instructions
Before using the appliance, please read and follow all the basic safety instructions, including
the following:
• Before using, check that the voltage of the product rating and ensure it coincides with
your mains voltage.
• Do not let cord hang over the edge of table or counter.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not operate the appliance with a damaged or malfunctioned cord or plug. Return
the appliance to the nearest authorized service agent for examination or repair, when
there is any indication of damage.
• Do not replace any parts of the appliance with the spare parts other than the
appliance genuine parts. The use of any parts of the appliance not recommended or
sold by the manufacturer may cause fire, electric shock or injury.
• Avoiding contact with any moving parts as serious injury may occur.
• Do not leave foreign objects, such as spoons, forks, knives or the measuring cup, in
the jug as this will damage the blades and other components when starting the
machine and may cause injury.
• Blades are sharp. Handle carefully.
• The use of attachment, including jug, jug lid, not recommended or sold by
manufacturer may cause fire, electric shock or injury.
• The jug should not be more than 2/3 full when the tamper is left in while blending. Do
not exceed 30 seconds of continuous blending with the tamper in place.
• When making nut butters or oil based foods, do not process for more than one
minute after the mixture starts circulating. Over-processing can cause dangerous
overheating.
• When blending hot liquids or ingredients, use caution: spray or escaping steam may
cause scalding and burns. Do not fill container to the maximum capacity. Always
begin processing on the lowest speed setting. Keep hands and other exposed skin
away from the lid opening to prevent possible burns.
• Turn all controls to OFF and unplug the blender when it is not in use, before installing
or removing parts, and before cleaning.
• This is an attended appliance. Do not leave the appliance unattended during use.
• Always disconnect the appliance from the power supply if it is left unattended and
before assembling, disassembling or cleaning.
High speed blender_EMF2056.indb 3
High speed blender_EMF2056.indb 3
E-3
10/5/2016 10:29:27 AM
10/5/2016 10:29:27 AM
Advertisement
