Wolf Blaze User Manual page 49

Fault system Fault
Compression ratio is
too high.
Excessive noise
coming from engine.
The cylinder pressure is
Engine too low.
Excessive smoke from
muffler.
The cylinder head
leaks.
The front wheel
vibrates.
Front Wheel
The front wheel has
play in it.
47
USER'S MANUAL
Causes
There is carbon buildup in the combustion
chamber and on the top of the piston.
The valves are not adjusted properly.
The air valve is broken.
The cylinder and piston are worn out.
The cylinder, rings, valves, piston could be
damaged.
The piston ring could be damaged.
Oil leaking past the valves.
There is wearing on the piston or cylinder
wall.
The valves need to be re-seated.
The front shock absorber is damaged.
The front wheel is damaged.
The triple tree is bent.
The front wheel is improperly mounted.
The front wheel bearings are worn out or
damaged.
The front wheel is damaged.
The front wheel nut is loose.
The tire pressure is too low.
The front wheel bolt is loose.
Common Faults and Troubleshooting
Troubleshooting
Clean the carbon buildup in the combustion
chamber and on the top of the piston.
Re-adjust the valve clearance.
Replace the air valve.
Replace the damaged internal engine parts.
Replace the cylinder, piston, piston rings.
Replace the piston rings.
Replace the valve seals.
Replace the piston or cylinder.
Re-Dress the valves and valve seats.
Replace the front shock absorber.
Replace the front wheel.
Replace the triple tree.
Replace the front tire.
Replace the front wheel bearings.
Replace the front wheel.
Tighten the front wheel nut to specs.
Increase the tire pressure.
Tighten the front wheel nut to specs.