Basic Vehicle Checks And Maintenance Levels - Wolf Blaze User Manual

Basic Vehicle Checks and Maintenance Levels:

There are regular checks that you should do on your vehicle on a
regular basis to ensure that the vehicle is always safe to use and to
keep it in good condition. Keeping it in good condition will also help
in maintaining the vehicles optimal performance.
When starting the engine after it's been sitting for more than a
1.
few hours and after cleaning the vehicle, start the engine, and let
it run at idle for several minutes.
2. Check for any fluid leaks.
3. Check for any loose connections.
4. Check to ensure that all lights are working.
Different levels of maintenance and service will be taken for different odometer
readings and performance conditions of the
The very first oil change should be done between 300~500 miles to replace the
"break-in" oil with fresh oil. The valve clearances should be checked and
adjusted if necessary.
Level 1: Service and Maintenance: Odometer reading 1000~1500 miles. Oil
change, valve checking/adjusting and lubricate any necessary parts and check
nuts and bolts and secure if necessary. (See the Service and Maintenance section
for more details).
Level 2: Service and Maintenance: Odometer reading 2000~2500 miles. Oil
change, valve checking/adjusting and lubricate any necessary parts and check
nuts and bolts and secure if necessary. (See the Service and Maintenance section
for more details).
Level 3: Service and Maintenance: Odometer reading 3000~3500 miles. Oil
change, valve checking/adjusting and lubricate any necessary parts and check
nuts and bolts and secure if necessary. Disassemble necessary parts and check
for any hidden hazards/wear.
19
USER'S MANUAL
vehicle
:
Oil changes and basic service should be done every 1000 miles.
**ALL WORK SHOULD BE DONE AT AN AUTHORIZED WOLF
DEALERSHIP TO ENSURE THE WARRANTY DOES NOT GET
VOIDED**
Pre-operation vehicle checks
Before running the vehicle, please follow the following steps to check it, and
ensure your driving safety.
Turn the ignition on and
ensure all turn signals and
other lights are working.
Check the fuel gauge to
ensure you have enough
gas to get to your
destination.