Service And Maintenance Of The Fuse; Service And Maintenance Of The Horn - Wolf Blaze User Manual

Service and Maintenance for the Fuse
The fuse is connected in series to the battery. If there is a sudden
power surge or issue within the electrical system, the fuse will
automatically break to protect the battery and other electrical
components.
Caution
* In the event of a blown fuse, the cause should be found right
away as it is indicative that there may be a more serious
electrical problem present. In this situation, please bring the
vehicle to your authorized WOLF Brand Scooters dealer for
service.
If the entire electrical system of the vehicle is not functioning,
check the fuse first. A blown fuse will cause all electrical
components including the electric start to stop functioning.
41
USER'S MANUAL
Service and Maintenance for the Horn
Over time the horn may need to be adjusted. By removing the front
panel, you can access the horn and adjustment screw.
If the horn sound becomes weak or isn't working at all, remove the
front cover, and use a multi-meter to measure the voltage of the horn
circuit. You must do this with the ignition turned on. and it should
measure 12 Volts DC. If that is the reading you find, you should then
use the adjustment screw in the middle of the horn to get the correct
horn sound. If you do not get a read from the multi-meter on the horn
circuit, you should have the vehicle checked out by your local WOLF
Common Faults and Troubleshooting
Brand Scooter Dealer.