Important Safety Information - AT&T SB8725 User Manual

Table of Contents

Advertisement

Important Safety Information

This symbol is to alert you to important operating or servicing
instructions that may appear in this user's manual. Always follow basic
safety precautions when using this product to reduce the risk of injury,
fire, or electric shock.
Safety Information
Read and understand all instructions in the user's manual. Observe all
markings on the product.
Avoid using a telephone during a thunderstorm. There may be a slight chance
of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak. Under
certain circumstances, a spark may be created when the adapter is plugged
into the power outlet, or when the handset is replaced in its cradle. This is a
common event associated with the closing of any electrical circuit. The user
should not plug the phone into a power outlet, and should not put a charged
handset into the cradle, if the phone is located in an environment containing
concentrations of flammable or flame-supporting gases, unless there is
adequate ventilation. A spark in such an environment could create a fire or
explosion. Such environments might include: medical use of oxygen without
adequate ventilation; industrial gases (cleaning solvents; gasoline vapors;
etc.); a leak of natural gas; etc.
Do not use this product near water, or when you are wet. For example, do not
use it in a wet basement or shower, or next to a swimming pool, bathtub,
kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If
the product comes in contact with any liquid, unplug any line or power cord
immediately. Do not plug the product back in until it has dried thoroughly.
Install this product in a protected location where no one can trip over any line
or power cords. Protect cords from damage or abrasion.
If this product does not operate normally, see the Troubleshooting section in
your product's manual. If you cannot solve the problem, or if the product is
damaged, refer to the Limited warranty. Do not open this product except as
directed in your user's manual. Opening the product or reassembling it
incorrectly may expose you to hazardous voltages or other risks.
This power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, an under-the-table or cabinet outlet.
Warning: Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Caution: Use only the power adapter provided with this product. To
obtain a replacement, visit our website at www.telephones.att.com or call
1 (800) 222-3111
SAVE THESE INSTRUCTIONS
IP Phone User's Guide
. In Canada, dial
12
1 (866) 288-4268
.

Advertisement

Table of Contents
loading

Table of Contents