Advertisement
Available languages
Available languages
Operation:
1.
Remove the USB cover to insert the Micro SD card (4). Insert the Micro SD card
conform the diagram on the housing. The video recorder does not work without a
Micro SD card.
2.
Place the SEC-DVRCAM10 first in the USB connector of a PC or notebook to fully
charge the battery. After 2 hours the SEC-DVRCAM10 is ready for use.
3.
Power ON the SEC-DVRCAM10 with the ON/OFF switch (2). The POWER/
FUNCTION indicator (3) flashes a few times before it lights up blue constantly. If the
indicator lights up green, it means no Micro SD card is inserted.
4.
Press the RECORD/PAUSE button (1) to start recording. The POWER/FUNCTION
indicator (3) lights up green also, indicating recording is active.
5.
Press the RECORD/PAUSE (1) button again to stop recording.
6.
For playback of the recordings, place the SEC-DVRCAM10 with the USB connector
in a free USB port of a PC or notebook. The PC or notebook will recognize the SEC-
DVRCAM10 as a removable disk. Open the folder to view the recordings.
Remark:
If the battery is low or empty, the POWER/FUNCTION indicator (3) will flash red. The
recording will be saved before the SEC-DVRCAM10 shuts down.
Specifications:
•
Resolution:
•
View resolution:
•
Viewing angle:
•
Data storage:
•
Video format:
•
F
e l i
s
z i
: e
•
Charging time:
•
B
a
t t
r e
: y
•
Consumption:
•
Dimensions:
•
W
e
g i
h
: t
•
Operating Temperature:
Note: for 3GP playback, download the free player: www.apple.com/quicktime/download/
640x480 (pixels)
352x288 (CIF)
58°
Micro SD card, up to 2GB
3GP
>
2
M
B
t y
/ e
m
n i
u
e t
2 hours (via USB)
L
R I
b -
t a
e t
y r
155mA
97x25x12mm
3
2
g
0°C~50°C
3
Advertisement
