Back to Table of Contents
Oven - Accessing the Cooking Components
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Remove the all ¼" (6.4 mm) hex-head screws from the rear
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
2. Remove rear panels and set aside. You now have access to
the following components (may vary by model):
•
•
Light assembly
•
Thermal Limiter
•
Oven temp sensor
•
Light assembly (right side light)
•
Cooling Fan
•
Broil element
•
Bake element
•
•
F
B
C
J
A. Conv
Fan
B. Light assembly
C. Thermal limiter
D. Oven temp sensor
E. Light assembly (right side light)
Whirlpool
COMPONENT ACCESS
D
I
G
A
H
F. Cooling Fan
E. Broil element
H. Bake element
I. Hall E ect Sensor
J. Conv
nt
Smart Wall Ovens
®
E
4-13