Table of Contents
Advertisement
MAINTENANCES
Cleaning Drain Pump Filter
！
Warning!
• Be careful of hot water!
• Allow detergent solutions to cool down prior to cleaning.
• Unplug the machine to avoid electrical shock before washing.
• The drain pump filter can filter threads and small foreign objects
from the wash.
• Clean the filter periodically to ensure the normal operation of
washer dryer.
Dam-Board
After the power is
disconnected, pull out
the Dam-Board.
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates
should be inserted by aligning to hole plates otherwise water may leak.
• Some machines don't have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make the water run into the basin.
• When the appliance is in use and depending on the programme selected there can be
hot water in the pump. Never remove the pump cover during a wash cycle. Always wait
until the appliance has finished the cycle and is empty. When replacing the cover, ensure
that it is securely re-tightened.
1
Twist the filter as shown
above and take out
foreign objects.
2
10
24
Re-insert each part after
the foreign objects have
been removed.
3
Hide quick links:
Advertisement
Table of Contents
