Connecting Mag To A Bluetooth Audio Device - Prime Ancilla Mag User Manual

Connecting Mag to a Bluetooth Audio Device

In order to connect Mag to a Bluetooth audio device, the two devices
must first be paired. (Refer to Pairing a Bluetooth Device pages 12 to 13.)
Mag is in standby mode.
1
The LED will blink in blue every 5 seconds.

Short press
2
Mag will connect to the last audio device

used and playback music.
High tone beep :

Low tone beep :
Low tone beep :
Mag will stream music from the
3
connected Bluetooth audio device.
Use the included earphones to listen to

music in stereo sound.
To disconnect Mag from the Bluetooth
4
device long press
You cannot disconnect while music is playing.

.
connected.
connection failed.
(
Try connecting again.)
for 1 second.
17
Ancilla Mag -