Connecting Mag to a Bluetooth Phone
In order to connect Mag to a Bluetooth phone, the two must first be paired.
(Refer to Pairing a Bluetooth Device pages 12 to 13.)
14
- Ancilla Mag
Mag is in standby mode.
1
The LED will blink in blue every 5 seconds.
Short press
2
Mag will connect to the last phone used.
High tone beep :
Low tone beep :
You can now use Mag with the
3
Bluetooth phone.
Some functions such as voice dialing,
call waiting may differ depending on the
phone model.
To disconnect Mag from the Bluetooth
4
phone long press
You cannot disconnect during a conversation.
.
connected.
connection failed.
(
Try connecting again.)
for 1 second.