Pairing Mag with a Bluetooth Device
In order to use Mag with a Bluetooth device, the two must first be paired.
12
- Ancilla Mag
Make sure MAG is turned off.
1
Keep
pressed and switch on the
power.
Release
when you see the LED blinking
rapidly in blue.
MAG enters into pairing mode.
Select the Bluetooth device search
2
function from the Bluetooth Menu of
the device to be paired.
The device will search for Bluetooth
▶
devices within a 10m (30ft) range.
When 'Ancilla Mag' appears on the
3
device list, select it.
The device list appears automatically after
device search.
Enter the pin code '0000' when
4
requested.
The default pin code is '0000' .