Muji Two-seater High-back Reclining Sofa Instructions For Assembly And Use

Two-seater High-back Reclining Sofa
One-seater High-back Reclining Sofa
Thank you for purchasing this product.
In order to continually use this product in a safe manner, please thoroughly read these
Instructions for use and assembly so that you understand the contents before properly
assembling and using the product.
Please store the instructions and the attached Allen key, etc. so that they can be retrieved
whenever necessary.
Cautions regarding proper place for assembly and use
These precautions regarding proper place for assembly and use are provided to prevent injury/damage
to customers and their surroundings by ensuring safe assembly of MUJI products for continual use.
are as follows.
Warning Matters where there is a possibility of death or serious injury.
Caution Matters where there may occur human injury and physical damage.
Caution before assembly
Warning
Packing material that is no longer
necessary should be disposed of
immediately. Do not keep such
materials in places that can be reached
Precautions for use
The cushion cover can be dry-cleaned after removal.
* The body cover cannot be dry-cleaned.
Caution
* Do not remove the body cover.
This will cause damage and failure.
Always use with wooden legs attached.
Caution
This will cause damage and failure.
Caution Warning
Do not drag when Do not sit on the
moving. back as this is
extremely
dangerous.
This will cause
This will cause
serious injury or
damage and failure. accident.
Instructions for assembly and use
Caution
· Install legs on a carpet or mat, etc. to prevent the
· If parts are missing or defective during assembly,
please immediately stop assembling and contact
MUJI.
Warning Warning
Do not sit in a Lever operation with
reverse position as cushions removed is
this is extremely extremely dangerous.
dangerous.
Prohibited
This will cause
This will cause
serious injury or
accident. serious injury.
For permanent use
Cushion maintenance
Cushion removal
Removal of cushions from the body enables maintenance
to be carried out.
Operate the lever to Unfasten the fasteners in
cause the back to a clockwise direction,
recline. and detach the cushions.
Do not operate the lever with cushions
removed, as this is extremely dangerous.
Warning
This will cause serious injury.
Innner cushion removal
Turn the removed cushions upside-down,
open the fasteners and detach the down
cushions from inside.
Removed cushion covers (back)
Cushion slots
(with fasteners)
Inner cushion care
I
t is possible to dry-clean cushion covers from
which the cushions have been removed.
*Cleaning may cause slight shrinkage.
Please carry out maintenance based on the
following items requiring caution when handling
cushions.
Caution when handling cushions
A slight characteristic odor of the
material remains. Dry in a well-ventilated
place, beat and replace the air inside with
new air and shade-dry for 3-4 hours.

gather in the corners. In order to prevent
*For details on how to assemble, please refer to the
enclosed Instructions for assembly and
<
Fastener removal/installation
>
procedure
Fastener
Removal:
When removing, open the
fasteners in order from 1.
Installation:
When installing, close the
fasteners in order from 4.
Cushion slots
(with fasteners)
Head cushion
Back
Back cushion
Seat cushion (large)
* Please be aware that only the seat
Front
directions.
losing their shape, periodically beat the cushions
lightly to get them into shape.
Due to the characteristic of the material, the hardness

of cushion may vary slightly in temparature change.
If it is high, the cushion feels softer, while it is low,
harder.
.
(small)
(medium)