Selecting C.o. Line; Outgoing Call Transfer Function; Call Transfer - Excelltel PABX MD308 User Manual

Operation: * # 1 M
You can use this operation if you want to select a CO line to dial out.
Format: Pat the hook then dial the extension number
Description: This function let you make an outgoing call from one extension then divert and
connect other extension to C.O. Line.
Operation: Pat the hook then dial the extension number
Description: Allows you to transfer an incoming call to another extension.
Remark:
1>. There may be following 4 cases after a call is transferred from A to B:
a. A does not hang up and B picks up his handset
Then communication between A and B is established while the outside caller is
on-holding (music on holding), whoever hangs up (A or B), the system transfer
outside caller to the other.
b. A does not hang up and B does not answer A within 25 seconds
If Ext. B does not answer A within 25 seconds, then A will restore the connection
with C.O.Line, and B will stop ringing.
c. A hangs up and B answers the call
B will answer the outside caller.
d. A hangs up and B does not answer the call within 25 seconds
Call will be back to A and will ring for 25 seconds, if A is busy, the system will cut off.
2>. The FLASH TIME is from 750ms to 2000ms for patting the hook, you may press FLASH
button instead of press the hook for transferring the incoming call.
3>. The extension, which transfer the call, has 5 seconds to dial the extension number
required otherwise the incoming call will be back to him again.
4>. The Flash time can be set.
(M=1-3, C.O. Line no)