Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Excelltel PABX MD308
Summary of Contents for Excelltel PABX MD308
- Page 2 Table of Contents Chap 1 Installation------------------------------------------------------------------------------------1 System Appearance----------------------------------------------------------------------- --1 Attention----------------------------------------------------------------------------------------2 Warning------------------------------------------------------------------------------------ ----2 Chap 2 System programming------------------------------------------------------------------------------3 How to Enter Programming mode--------------------------------------------------------------- -- 3 Restore the default setting--------------------------------------------------------------------------- 3 Change password--------------------------------------------------------------------------------------3 Flash time (For active the hold and diverting operating) setting-----------------------------4 Enable / Disable C.O.lines-------------------------------------------------------------- - --- --- ----4 C.O.
- Page 3 Table of Contents Function brief introduction ----------------------------------------------------------------8 Chap -------- Answering calls at operator mode -------------------------------- ------------------8 Answering calls at auto-attendant mode ---------------------------------- ----------------8 Call pick up -------------------------------------------------------------------------------------- 8 Outward dialing directly -----------------------------------------------------------------------8 Outward dialing by dial 9 first -------------------------------------------------------- ------- 8 Exterior-line Booking --------------------------------------------------------------------------8 Selecting CO line...
- Page 4 LED Display Front View Line1 L in e2 Line 3 60 3 60 6 Power Socket Extension Line Port C.O.Line Port 208M / 308M Rear View...
- Page 5 ① The telephone exchange shall be installed in a stable indoor place with dry, ventilated ℃ ℃ environment. (Temperature Range : 0 45 , Humidity Range :20%-80%.Avoid straight sun shine or in the envi ronment of flammable or caustic gas.) Special telephone wire is preferable.
- Page 6 Chap 2 System programming Using DTMF phone as extension, and all setting must be done on extension 601- 604. Commands can be continuously input, press "#" to indicate the end of command. If there is any mistake during programming, just press "*" to restart without hang up. User will hear a prompt tone "du"when input is correct while three "du"for incorrect input.
- Page 7 Instruction: 00 L # Explanation: L=1-5 L=1 ---------0.8s L=2 ---------1.0s L=3 ---------1.2s L=4 ---------1.5s L=5 ---------1.8s Instruction 0600# Enable all C.O. Lines 0610# Disable all C.O. Lines 060M# Enable the M C.O. Line 061M# Disable the M C.O. Line You must use these commands according the actual tunk lines before using this prodult!!! ’t If you don enable any C.O.Line, the system wil consider there is no C.O.line and...
- Page 8 Instruction: 12 # Explanation: input 12# in the state of system programming, it begin 8-second-digital recority double audio frequency phone and pick up handset for recording. User can do recording for several times until satisfy. Instruction: 13# Explanation: In the state of system programming, it begin record listen in when hear "du" and end it when hear "du"...
- Page 9 Instruction: 3 M N 0 # Enable one extension 3 M N 1 # Disable one extension 3 M # Disable all Explanation: "M" means C.O. Line port No. (1-3). "N" The last 2 digits of original extensions (601-608) Order: 40 N L (set service grade is the grade L of extension N) 40 L # (all extension are grade L)
- Page 10 Instruction: 43PP A B C D # (PP is the number of group, from 01 to 16) (Clear all the first-digit number of dialing-out) （ ） 43PP # Clear the licensed first-digit of dialing-out of group Pp Note: that is to say 16 groups 4-digit first-digit can be used, ABCD is the first-digit of the locking numbers, it could be less than 4 digits, ended with #.
- Page 11 The extension(s) set to ring will ring when an incoming call is received, and pick up the handset you may answer the call directly. No extensio n will ring when an incoming call is received, the message recorded will be heard be fore dialing extension numb er. Rem ark: 1.Yo u ca n set differe nt DISA mod e.
- Page 12 Operation: * # 1 M (M=1-3, C.O. Line no) You can use this operation if you want to select a CO line to dial out. Format: Pat the hook then dial the extension number Description: This function let you make an outgoing call from one extension then divert and connect other extension to C.O.
- Page 13 Format: Pat the hook and * + extension number Description: Allows you to add a third part to a two-parts conversation and make a three- parts conference. You can have only two extensions with one C.O. Line. Operation: Pat the hook and press # # The occupying exterior line can be reversed by exchanger.
- Page 14 Operation for enable: *#81 abc (at direct outward mode) Operation for disable: *#81# (at direct outward mode) Description: Allows an extension to transfer incoming calls automatically to another extension. Remark: (1) Input " * " at first if the extension in direct outward mode. (2) After successful setting, you can hear a beeper.
- Page 15 BREAKDOWN CAUSE SOLUTION Check the power socket and Power Running light malfunction Power off supply Disconnected wiring Reconnect the wiring or try to remove the No sound from extension malfunction of telephone telephone s failure Bad connetion Screw down the jojnt Cacophony The distributing of line is not Leave telephone from the disturbing...
- Page 16 Chap 6 Default settings Operating mode ----------------------------------------------- ------------------ ----operator mode Ringing extension----------------------------------------------- --------------------------- -------602 Trunk line grouping------------------------------------------- ------------------------ -----no setting Restriction class ----------------------------------------------- --------------------------- ----class 2 Restrict outgoing digits------------------------------------ ---------------------- ------------------no C.O line------------------------------------------------------- ---------------------------- -----------1-8 Extension numbers-------------------------------------- --------------------- ---------------601-608 Dialing out mode-------------------------------- ---------- ---dial "9"or delayed for outgoing call Chap 7 System Programming Instruction...
- Page 17 Monitoring the holding music 1 4 # Operator setting 15N# Auto-attendant Release the exterior line 160# mode no answer Transfer to operator 161# process direct outgoing N 2N0# Setting dialing out indirect outgoing N 2N1# mode all extensions direct outgoing all extensions press 9 for outgoing Enable one extension 3MN0#...