Function Brief Introduction; Incoming Call; Outgoing Call; Answering Calls At Operator Mode - Excelltel PABX MD308 User Manual

The extension(s) set to ring will ring when an incoming call is received, and pick up the
handset you may answer the call directly.
No extensio n will ring when an incoming call is received, the message recorded will
be heard be fore dialing extension numb er.
Rem ark: 1.Yo u ca n set differe nt DISA mod e.
2.W hen a caller dials "0" for inquiry, o perator extensio n will ring. If oper ator extensio n is
bu sy, then system can use the function " bus y call transfer".
The incoming call can be answered by the extension that is not ringing rather than the
ringing one, thus makes the answering more convenient.
Operation: Pick up and press * # 9
Pick up the handset and dial external number directly after hearing the C.O line tone.
Pick up the handset and dial "9" first after hearing the internal dialing tone, then dial
the C.O line number after hearing the C.O. Line dialing tone.
If exterior line is busy and calling has to be done immediately, a booking of exterior
line will be done and will be clue to the current user.
Operation: * # 0