Advertisement
4 Mark and drill 3 holes
in the wall at the
desired height.
Filling the dispenser / using the dispenser
•
To fill the dispenser, press the tank up and pull it forward. Fill it, then replace it in the
housing.
•
Soap can be dispensed by
pressing the pump either by
hand or elbow.
5 Place the supplied
spring pins in the
holes. Fix the wall
mount using the
supplied screws.
6 Next, hang the housing of
the soap dispenser on the
wall mount.
7 Insert the hose into the
soap and slide the tank up
until it rests securely on the
lower support.
- 7 -
Advertisement
