Location Of Controls - Salora CR 615 Instruction Manual

LOCATION OF CONTROLS

1. LED Display
2. Volume Control
3. Tuning Control
4. Band Selector
5. Snooze Button
6. Alarm Set Button
7. Time Set Button
8. Sleep Set Button
REAL TIME SETTING
1. Set the Function Selector (11) to"OFF". Connect the mains lead to the power supply. The
clock display will flash on and off indicating a power interruption and that the displayed time is
incorrect.
2. To set the correct time, press the Time Set Button (7) and Hour Set Button (10), or Minute Set
Button (9), together, until the correct time is displayed.
3. Open the Battery Door (14) on the back of the unit and put in a 6LR61 (or equivalent) 9-volt
battery (battery not included). The purpose of this battery is to store the information relating to
alarm time and to keep the clock functioning in the event of disconnection from the mains
supply or power interruption. Should this occur, the clock would continue to keep time, but will
not display.
Note: The clock accuracy will decrease due to the voltage drop of the backup battery. If no
backup battery is installed or the power interruption is prolonged, you will need to set the clock
again.
PLEASE NOTE: When operating from battery only, the clock will only remain accurate for a short
EN
9. Minute Set Button
10. Hour Set Button
11. Function Selector
12. Dimmer Selector
13. FM Antenna
14. Battery Door
15. Mains Lead
16. Auto Indicator
1