Table of Contents
Advertisement
2.2
Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes. (Figure 1)
3.
Remove the base (Figure 2).
4.
Use a screwdriver to remove the screw(s) on the hinge (Figure 3), then
remove the hinge.
VA279HAE
VA279HAEL
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
•
2-2
(
)
Figure 2
(
)
Figure 1
The VESA wall mount kit (100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
(
)
Figure 2
1
2
(
)
Figure 2
(
)
Figure 3
1
2
(
)
Figure 3
Chapter 2: Setup
Hide quick links:
Advertisement
Table of Contents
