Allen-Bradley Logix5000 Series Application Book page 27

7. Enter a value of 100 in the first element of the Data array.
8. Switch the Scope to CF_Read_Write in the tag monitor to view the
Controller Scoped tags.
9. Sort the tags by name.
10. Find the tag execute_CF_Write_Data.
11. Enter a 1 in the value field and press Enter.
The tag will go back to a 0. This indicates that the application has
attempted to write to your file.
12. Find the tag CF_Write_Seq_Status and click
This is a user-defined data type (UDT). As the tag name indicates, this
will give you status on the write file sequence. There is an element of the
UDT called Overall_Status. At this point, it should be equal to 1. This
means that the file was written successfully.
If another value is present, refer to AppendixC, Troubleshoot the
CompactFlash File System.
Example Application
+
to expand the tag.
Publication LOGIX-AP007B-EN-P - January 2007
27