NewTek Connect Spark Pro Operating Instructions Manual page 5

4. Otherwise, connect power from the supplied power adapter to Spark Pro's USB-C
port, located beside the Ethernet connector. (If using another adapter, it should
have a full-size USB (type A) output connector and supply at least 2.4 amps at 5V.)
Step 4 – Access Spark's Webpage
5. Use the NewTek Studio Monitor application installed with your NDI
on the network as follows:
a. Click the menu gadget at upper-left to view NDI sources.
b. Use the menu to select your Spark Pro unit.
c. Then click the gear icon at lower right when your mouse pointer is over Studio Monitor to
open Spark's webpage in your web browser.
Note: Step 4, accessing the device webpage, varies slightly for OS X users. Please refer to Section 2.4 for details.
6. Log into the webpage using the default user name ("admin") and password (also "admin").
Note: The Microsoft Edge™ web browser is not fully supported at this time. On Windows platforms, please
another modern web browser or Internet Explorer™.
Step 5 – Update Spark Pro's Firmware
We encourage you to keep the firmware on your NewTek™ device up to date. Firmware updates may contain
bug-fixes, provide improved performance, or even enable new features. The update process is not
complicated – simply follow the steps listed below:
Tools pack to locate Spark Pro
®