Assembly Instructions For The Radwagon - Rad Power Bikes Front Rack Owner's Manual

Assembly Instructions for The RadWagon

Follow these assembly instructions if you would like to install the Front Rack on the 2018 RadWagon. If you are installing the
Front Rack on a different 2018 Rad Power Bike model, please go back to the table of contents and look for the appropriate
page.
NOTICE: The following assembly steps are only a general guide to assist in the assembly of your Front Rack and is not a complete or comprehensive
manual of all aspects of assembly, maintenance and repair. We recommend you consult a bicycle repair specialist to assist in the assembly, repair and
maintenance of your bicycle and all accessories.
Required Tools:
- 2mm, 3mm, and 4mm Allen Wrenches
- Philips head screw driver
- 8mm and 10mm wrench
Step 1:
Move the headlight to the front rack
- Remove the headlight and bracket from the bike. Make sure to reinstall the bolt the hold the fender on.
W W W . R A D P O W E R B I K E S . C O M
25