Assembly Instructions for The RadMini
Follow these assembly instructions if you would like to install the Front Rack on the 2018 RadMini. If you are installing the
Front Rack on a different 2018 Rad Power Bike model, please go back to the table of contents and look for the appropriate
page.
NOTICE: The following assembly steps are only a general guide to assist in the assembly of your Front Rack and is not a complete or comprehensive
manual of all aspects of assembly, maintenance and repair. We recommend you consult a bicycle repair specialist to assist in the assembly, repair and
maintenance of your bicycle and all accessories.
Required Tools:
-
3mm, and 4mm Allen Wrenches
-
Philips head screw driver
-
8mm and 10mm Wrenches
Step 1:
Move the headlight to the front rack
-
Remove the headlight and bracket from the bike
W W W . R A D P O W E R B I K E S . C O M
18