Advertisement
4-3. Clear Server Enhancement
This feature allows the user to clear jobs for each Held jobs, Active Jobs, Printed
Jobs, Archived jobs (Server Internal), Archived jobs (Network Links), FreeForm
Masters, Scan jobs separately.
This feature can be executed only from CWS4.1 and will not be available from LCD
menu and CWS LE 4.0 for Macintosh. (Existing Clear Server command is available
on LCD menu and CWS LE for Macintosh.)
4-4. Align Trays (Same feature as CLC server controllers)
When a new copier is configured, many features and pieces of equipment on that
copier need to be set up and adjusted. Paper tray alignment is no exception. A
technician could spend several hours skewing and shifting the paper trays of a
copier to ensure accurate "back-up" when printing duplex pages.
The Fiery Tray Alignment feature shifts and rotates the image to be printed on the
page in order to correct for the paper tray's physical inadequacies.
The Fiery Tray Alignment feature is designed to seamlessly work with Command
WorkStation, to work from the Fiery's LCD panel, and to work with other EFI Fierycompatible
applications.
Note: Tray Alignment calibration values are stored for each tray (Side 1), and if
applicable, the duplex side of each page (Side 2).
n Command WorkStation, the Tray Alignment feature may be accessed through the
Server->Tray Alignment menu option. This opens the Tray Alignment dialog
The Tray Alignment dialog separates the tray alignment action for a single paper tray
into a series of 4 steps.
Step 1 - Select Tray
The first step in tray alignment is to select the paper tray to be aligned/calibrated,
and media size. The trays available in the Tray pull-down list are dependent upon
the device that Tray Alignment has been called for. The user must select the media
size that the tray is to be calibrated for.
F-3
Acc-391
(6/24)
Advertisement
