Canon PCL PRINTER KIT-J1 Installation Procedure page 5

10) Remove the IP cover [1].
- 10 screws [2]
[2]
[1]
F-1-11
11) Shift the 2 locking levers [1] back to their initial
position.
[1]
F-1-12
[2]
[2]
12) Connect the connector [1] of the 32MB ROM to
the connector [2] of the IP PCB.
- 1 screw (binding; M3x4) [3]
[3]
13) Attach the IP cover you removed in step 10).
When attaching the IP cover, take care not to damage
the grounding plate [2] by the USB port [1].
Also, after attaching the IP cover, check to make sure
that the grounding plate is in firm contact with the
USB port.
[2]
5
[1] [2]
F-1-13
[1]
[2]
F-1-14