Canon PCL PRINTER KIT-J1 Installation Procedure page 4

6) Remove the 128MB RAM [1] in the direction of
[A].
- 2 locking levers [2] (shift in the direction of [B])
[2]
7) If a UFRII LT PRINTER KIT-J2 is installed,
perform steps 7-1) and 7-2).
7-1) Remove the LAN cover [1].
- 4 screws [2]
[2]
7-2) Disconnect the connector [1] of the IP-LAN
cable.
- 1 wire saddle [2]
- IP-LAN cable [3]
[B]
[A]
[B]
[1]
F-1-6
[2]
[1]
F-1-7
[1]
8) Disconnect the soft ID cable [1].
- 1 cable clamp [2]
9) Release the claw [1] of the cable guide, and free the
cable guide [2] in upward direction.
[2]
4
[2]
[3]
F-1-8
[2] [1]
F-1-9
[1]
F-1-10