Canon BW UFRII LT PRINTER KIT-J2 Installation Procedure page 13

User Mode key >2 > 8 > User Mode key
[#SSSW] appears.
2) Press [<-] 5 times. When [REPORT] has appeared,
press [OK].
3) Press [+>] once. When [REPORT OUTPUT] has
appeared, press [OK].
4) Press [+>] 5 times. When [SPEC LIST] has ap-
peared, press [OK].
5) See that a SPEC REPORT is printed out. Check to
be sure that 'BDL-IMAGE' is 'ON'.
MEMO:
"SPEC REPORT"
- If 'TOTAL MEMORY' is 128 MB,
be sure 'BDL-IMAGE (600)' is 'ON'.
- If 'TOTAL MEMORY' is 256 MB,
be sure 'BDL-IMAGE (1200)' is 'ON'.
Chapter 1
5