Page 1
VERSA STEPPER SF-S0870 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly.
Page 3
EXPLODED DIAGRAM HARDWARE PACKAGE Note: When the hydraulic cylinder is used for 20 minutes, let the hydraulic cylinder cool down. Please do not touch the oil cylinder after use.
ASSEMBLY INSTRUCTIONS ① ② Figure 1: Take out the Computer (No. 9) and insert it according to the picture. Figure 2: Attach 2 Resistance Bands (No. 36) to the hooks as shown in the picture. Using the Stepper Important tips: Please put the stepper on flat, solid ground. It is recommended to place a carpet pad underneath the stepper to prevent damage to the ground after long-term use.
OPERATING INSTRUCTIONS Computer Display Functions SCAN: Automatically displays each function value in a sequence. TIME: from 0-99:59. CALORIES: Accumulated calorie consumption during exercise. This is only a reference value, not for medical reference. Count: The number of times accumulated. REPS/MIN: The rate of steps per minute.
TROUBLE SHOOTING Breakdown Solution 1. Interlocking is usually caused by movement over time. In this case, the heat produced by the step resistance causes inner dish rotational delay. If you Pedal rotation is not smooth want the pedal to be flexible to rotate, please wait or stops running for the cylinder to cool down before use.
Need help?
Do you have a question about the VERSA SF-S0870 and is the answer not in the manual?
Questions and answers