Subscribe to Our Youtube Channel
Related Manuals for Sunny 012
Summary of Contents for Sunny 012
- Page 1 MINI STEPPER WITH EXERCISE BANDS NO. 012 IMPORTANT: Read all instructions carefully before using this product. Retain owner’s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. -
Page 3: Exploded Drawing & Parts List
EXPLODED DRAWING & PARTS LIST Parts No. Parts... -
Page 4: Assembly Instructions
ASSEMBLY INSTRUCTIONS 1. Remove the stepper mainframe from the box. Lift one pedal up first and check to insure that the cable is properly secured around the wheel as shown in the picture below. 2. Locate and adjust the Knob (2) to the desired setting level, turning the knob clockwise "+"... - Page 5 EXERCISE BAND INSTRUCTIONS 1. Unscrew the hook nut located on the band until one end of the hook is open as shown in the picture below. 2. Attach the band hook onto the pedal hook and screw the hook nut closed so that the pedal hook is secured within the hook nut.
-
Page 6: Maintenance & Care Instructions
MAINTENANCE & CARE INSTRUCTIONS 1. If the stepper screeches during exercise, please discontinue use and do the following; loosen the screw located on the U-Shaped iron and then loosen the cable as shown in the picture below. Next, lubricate both the U-Shaped iron and cable to improve the sliding condition. -
Page 7: Exercise Computer
EXERCISE COMPUTER KEY FUNCTIONS: MODE: Press the MODE button to select a function. (Time, Rep/Min, Count, Calorie and Scan). OPERATION PROCEDURES: 1. AUTO ON/OFF: If the steps of the machine are put into motion, or the mode button is pressed the computer will become active, and shall remain active while either of these two things continue to be done, however without any signal for approximately 4 minutes, power (computer), will turn off automatically. -
Page 8: Changing The Battery
CHANGING THE BATTERY 1. Remove the plastic cap from the battery. 2. Remove the battery using the tool provided or your fingers. 3. Insert the new battery using the tool provided or your fingers. Ensure that the positive side of the battery which is labeled with a + sign is facing upward once the new battery is in place.
Need help?
Do you have a question about the 012 and is the answer not in the manual?
Questions and answers