Installing The Hoppers; Pusher Feed-Head - Robot Coupe CL 60 E Operating Instructions Manual

The dimensions of the dicing grid should always be
equal to or greater than those of the slicing disc.
Place the dicing grid in
the bowl of the vegetable
processor.
Make sure that the spur on
the grid is fully engaged
in the locking slot of the
motor unit.
Next, fit the corresponding
slicing
edged blade) and rotate
in a clockwise direction to
ensure that it is correctly
positioned.
c) If you want to use the French fries potatoes
cutting equipment:
This equipment comprises a French fries grid and a
special French fries slicing disc.
WARNING

PUSHER FEED-HEAD

To get the very best results
when cutting french fries,
remember to insert the
removable divider in the hopper
and load the potatoes into the
left-hand compartment (see
photo opposite).
8
Position the French fries
grid in the vegetable
preparation bowl.
Check that it is correctly
p o s i t i o n e d w i t h t h e
F r e n c h f r i e s
positioned at the outlet.
No tools (long plate locking nut or cabbage corer)
are required when using the divider.
disc (straight-
The choice of disc-fixing tool will vary according
❸
to the hopper and the type of vegetable:
Hopper
Pusher
Pusher
Pusher
Automatic
4-hole
p l a t e
Next fit the appropriate
slicing disc and rotate in
a clockwise direction to
check that it is correctly
positioned.
Vegetable Tool
All types except Loading cone
for cabbage and Long Plate
french fries Locking nut
Cabbage
+
Cabbage corer
large firm
+ key
vegetables
French fries Removable partition
All Agitator
All No tool
Screw the tool (unless you are using the removable
partition) firmly onto the motor shaft.
INSTALLING
THE HOPPERS
• PUSHER FEED-HEAD
USING THE FEED TUBE
Fill the feeder right up to the top with vegetables.
Apply a downwards pressure on the pusher and
maintain it until all the vegetables have been
processed.
Always press the vegetables down with a pusher to
improve cutting efficiency.
HOW TO USE THE CYLINDRICAL HOPPER
W A R N I N G
To get the very best results
when cutting french fries,
r e m e m b e r t o i n s e r t t h e
removable divider in the
hopper and load the potatoes
into the left-hand compartment
(see photo opposite).
Position the veg prep
❶
hopper on the motor unit.
The locking handle should
be facing you, on the
right.