Button Functions Matrix - Euro CB Supertooth II User Manual

Answer a Call: When the phone receives a call, ring tone will be on the
SuperTooth II alone, or both on the SuperTooth II and on the phone
(depending on your phone model). Just short press Accept/End
Button[6] to answer the call.
Reject a Call: Short press Reject Button[2] to reject an incoming call.
Set the Volume: Set the volume using the Volume Control[10].
1. Turn it clockwise to increase the volume.
2. Turn it counterclockwise to decrease.
Note: If the volume set is too high, it can cause feedback (whistling
sound), echo, or background noise during calls on some cell phones.
Audio Transfer:
from Phone to SuperTooth II (SuperTooth II initiated):
Short press the Accept/ End Button[6].
from SuperTooth II to Phone (SuperTooth II initiated):
Long press Reject Button[2].
H. Button Functions Matrix (Hands-free Profile)
Connected / Standby
Disconnected /
Standby
Incoming call (ring
being generated)
Active call at
SuperTooth II
Active call at Phone
Outgoing call being
set-up
Accept / End
Button
(Short press)
Initiates voice dial
Creates
reconnection
and initiates
voice dial
Accepts the call
Ends the call
Transfers the
audioto
SuperTooth
Ends the call
Accept / End
Button
(Long press)
Redials last dialled
number
Creates
reconnection and
redials last dialled
number
Rejects the call
Redials last dialled
number
Activates the
SuperTooth II and
creates another
redial of the last
dialled number
5
Reject Button Reject Button
(Short press) (Long press)
Removes the
Rejects the call ring audio from
SuperTooth II
Transfers audio
Ends the call
Transfers audio
Ends the call
to Phone
to Phone