Supertooth Ii; Switching On/Off; Charging; Installation - Euro CB Supertooth II User Manual

B. SWITCHING ON/OFF
Note: The Swivel Arm[1] can be adjusted to 0º , 55º and 210º orientations.
Power on: Flip up the Swivel Arm [1] from 0º to 55º to 210º
positions. The Bluetooth indicator[8] will glow (blue blink). This
indicates that the kit is ready (standby mode). Note: At first use, the
user has to pair SuperTooth II with his phone (refer to Section E
PAIRING TO A MOBILE PHONE.)
Power off: Flip down the Swivel Arm to 0º position. The Bluetooth
Indicator will become red then turns off after a second.
C. CHARGING
1. Plug the battery charger connector into the Charger Input [5] of

SuperTooth II.

2. Plug the other end of the charger into the electrical outlet.
D. INSTALLATION
Fixing of Clip
Fix the metal clip of SuperTooth II on the sun
visor.
Sun visor
Attach the magnetic back of SuperTooth II to
the fixed metal clip. The SuperTooth must be
placed wherein its microphone will be directed
to the mouth of the user.
The position of the SuperTooth II can vary
according to the position of the sun visor. The
Swivel Arm(1) can be adjusted to 0º, 55º
and 210 º orientations.
2