Indicator Status; Hands-Free Profile; Supertooth Ii Operations - Euro CB Supertooth II User Manual

F. Indicator Status
STATUS
Pairing Mode
Standby mode
On Call
Low Batt
Charging
Fully Charged
Ringing
G. HANDS-FREE PROFILE
Supertooth II
OPERATIONS
Make a Call (Normal dial): Dial the number using your phone. Normally,
audio will be on the SuperTooth II.
Note: With some phones like Siemens S55; Panasonic X70, audio is
always on the phone during an outgoing call. You will need to short
press Accept / End Button[6] to transfer the audio to your kit.
Make a Call (Voice dial):
1. First, you have to access the voice dialing function of your phone,
turn it on and record for a voice tag. (Kindly refer to the procedure in
your phone's manual.) Note: Voice dialing entries must be stored
in the phone's memory, not on the SIM card!
When done, execute voice dialing in your kit by proceeding with the
instructions.
2. Execute Voice dial: Short press Accept/ End Button[6].
3. A beep/short tone will then be heard on the SuperTooth II prompting
the user to say the voice tag of a contact to call.
4. Say the voice tag. The voice will be played back to you (audio on kit)
then the phone will dial the number automatically.
Make a Call (Redial):
Long press the Accept/ End Button[6]. Audio will be on the SuperTooth II.
End a Call (2 options for Hands-free Profile):
Short press the Accept/ End Button[6] or short press Reject Button[2].
Bluetooth Indicator [8]
Alternate Blinking - Red / Blue
Blinking Blue
Steady Blue
Fast Blinking Blue
4
Charge Indicator [9]
Blinking Red
Alternate Red / Green
Steady Green