Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Valet VAC-400 Stick Mate
Summary of Contents for Valet VAC-400 Stick Mate
- Page 1 Owner’s Manual Cordless Handstick The perfect companion for Valet Central Vacuums...
-
Page 3: Specifications
VAC-400 Stick Mate Congratulations on the purchase of your new VALET vacuum cleaner. We recommend that you carefully read this instruction manual to take best advantage of the product’s many useful features. Features: Exhaust Filter Release Buttons Dust Bin Release Button (not shown) 2. -
Page 4: Before You Begin
Before You Begin This cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used inappropriately. Please read these instructions thoroughly This will ensure you obtain full benefit from your new cleaner. -
Page 5: Safety Precautions And Warnings
Safety Precautions & Warnings IMPORTANT! Always switch off the appliance before cleaning, when not in use or attempting any maintenance task. The charger must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be used for its intended purpose as described in this instruction manual. - Page 6 Battery use and care 15. If the air inlet or floor head is blocked, switch off the cleaner straight away. First, clear the blocked object before attempting to start the The appliance is only to be used with the charger uniquely vacuum cleaner again.
-
Page 7: Installing And Removing The Battery
Assembly IMPORTANT! Always remove the battery from the appliance before fitting or removing accessories. Insert the powerhead into the rod. You will hear a “click” sound when it is securely in place. Insert the opposite end of the rod into the air inlet of the cleaner. You will hear a “click”... -
Page 8: On/Off Button
Instructions for Use On/Off Button Press the On/Off Button to turn On or Off the cleaner. Continuous Mode The cleaner can be operated without needing to continuously depress the On/Off Button. To enable Continuous Mode press the Continuous Mode Switch, as shown, until it clicks into place. - Page 9 Accessories Charging Insert the charger into the charging port on the vacuum cleaner. When the charging indicator light is flashing blue, the vacuum cleaner is being charged. When the charging indicator light turns Off, the vacuum cleaner battery is fully charged. NOTE: The cleaner requires up to 4 hours to be fully charged.
- Page 10 Remove the blockage, and switch on the cleaner. If the powerhead does not rotate, do not try to dismantle the powerhead, please contact Valet. WARNING! The cleaner has a continuous rotating brush when the Continuous Mode Switch is engaged. Never leave the cleaner in one spot for an extended period of time as this may damage the floor surface.
-
Page 11: Crevice Tool
Accessories Crevice Tool The crevice tool can be used to clean in between hard to reach places. Flexible Adaptor Clicks into different angles and positions for cleaning ceilings, corners, cupboard tops and other areas that traditional attachments can’t reach. Mini Motorised Pet Brush Ideal for picking up pet hair from furniture &... -
Page 12: Maintenance
Remove the dust bin filter by gently pulling it out of the bottom of the dust bin. Gently tap the filter to dislodge dirt and dust or it can be cleaned using your Valet central vacuum with the dusting brush attachment. -
Page 13: Cleaning The Cyclone Separator
This filter needs minimal maintenance under normal conditions however if it appears blocked contact Valet for a replacement. Cleaning the Powerhead Roller Brush WARNING! To reduce the risk of personal injury, detach the powerhead from the rod before cleaning and servicing the roller brush. -
Page 14: Troubleshooting
Troubleshooting Problems and solutions Handy troubleshooting tips. Fault Cause Solution Cleaner doesn’t start - Flat battery - Charge the vacuum cleaner Reduced suction - The dust canister is full of dust - Empty the dust canister - Dust bin filter is blocked - Clean or replace the dust bin filter - The air way is blocked - Clear the air way... -
Page 15: Conditions Of Warranty
Conditions of warranty Your Valet cleaner, in the case of domestic use, has a two year* Products deemed faulty will be repaired or replaced free of charge parts and labour warranty against product defects and failures at the discretion of Ness Corporation but no responsibility is... - Page 16 - Valet PrODUCtS a DiViSiOn Of COrPOratiOn Valet StiCk Mate iCentral/Valet trade & Dealer enquiries Owner’S ManUal HeaD OffiCe rev 1.0 february 2019 ness Corporation Pty ltd aBn 28 069 984 372 Ph: +61 2 8825 9222 Product Part no: VaC-400 email: sales@icentralsystems.com.au...
Need help?
Do you have a question about the VAC-400 Stick Mate and is the answer not in the manual?
Questions and answers