Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Eclipse ES Series
Summary of Contents for Eclipse ES Series
- Page 1 Instruction Manual 742 5/1/2009 Eclipse Ratio Regulators ES Series Version 1...
- Page 2 Copyright It must be understood that Eclipse’s liability for its product, whether due to breach of warranty, negligence, strict liability, or otherwise is limited to the furnishing of Copyright 1997 by Eclipse, Inc. All rights reserved replacement parts and Eclipse will not be liable for any worldwide.
-
Page 3: Table Of Contents
Compatability/Temperature Specifications ................6 Model Specifications ......................6 Flow vs Pressure Drop......................6 Dimensions .......................... 7 Design & Installation ........................ 9 General Information ......................9 Ratio Regulator/Pipe Connections ..................9 Gas Bias Adjustment ......................10 Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009... -
Page 4: Introduction
The purpose of this manual is to make sure that the ratio regulator component of a burner system is used in a safe, effective and trouble free manner. Figure 1.1. Ratio Regulators Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009... -
Page 5: Safety
■ This manual gives information for the use of these ratio regulators within their specific design purpose. Do not deviate from any instructions or application limits in this manual without written advice from Eclipse. Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009... -
Page 6: Specifications
Gas inlet pressure must be greater than the total of the outlet pressure plus the pressure drop across the regulator at the required flow. Capacity for natural gas (0.60 sg). When using propane or butane, divide capacity by conversion factors listed in Table 3.3. Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009... -
Page 7: Dimensions
Butane (2.0 s.q.) 1.82 3. Translate the intersection point back to the pressure drop axis. 4. The pressure drop at 23,700 scfh natural gas, equivalent to 15,000 scfh propane, is approximately 23.5" w.c. Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009... - Page 8 109.5 mm Rp 3/4 ES369 13-1/4" 3" NPT 16-1/16" 13-7/16" 10-3/8" 4-7/8" 6-1/8" 3/4" NPT ES369M 336.6 mm Rp 3 407.9 mm 341.3 mm 263.5 mm 123.8 mm 155.5 mm Rp 3/4 Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009...
-
Page 9: Design & Installation
3. Install the ratio regulator with the flow in the direction the ratio regulator of the flow arrow on the body. 4. When tightening the pipe into the valve body, hold the end of the regulator adjacent to that pipe. Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009... -
Page 10: Gas Bias Adjustment
4. Turn the combustion air to high fire and make sure the burners stay lit. NOTE: Some models are equipped with a pressure tap on the upstream side. It is open when the screw inside the tap is unscrewed approximately 1/2 a turn. Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009... - Page 11 NOTES Eclipse Ratio Regulator, V1, Instruction Manual 742, 5/1/2009...
- Page 12 Instruction Manual 742, 5/1/2009...