Warnings; Labels On The Machine - Primus IFF 50 Programming Manual

Ironing machine with insertion width 2000/2500/3200 mm with folder with electrical, steam and gas heating
Table of Contents

Advertisement

2. WARNINGS

TO MINIMIZE THE RISK OF FIRE, INJURY BY ELECTRIC SHOCK OR SERIOUS INJURIES TO PEOPLE
OR PROPERTY DAMAGE, PLEASE READ AND FOLLOW THE FOLLOWING INSTRUCTIONS:
– This version is the original version. Without this version, the instructions are incomplete.
– Before installing, operating or maintaining the machine, read carefully and follow the complete instructions, which
consist of this „Programming manual", „Installation and maintenance manual", „User´s manual" and keep them in a
handy place for later use.
– If any problems or failures occur which you do not understand, immediately contact your dealer, serviceman or
manufacturer.
– When the display reads „Battery is dead, do not switch off !!", do not switch off the machine by the main switch or
disconnect the power supply, before the battery has been replaced. Switch off the machine only by „A" key, fig. 3.4.A.
Risk of the factory setting and your programmes erasion.

2.1. LABELS ON THE MACHINE

Warning, dangerous electric current, electric device.
– Disconnect the power supply to the machine before doing any interventions into the machine.
– Přívodní svorky jsou pod napětím i při vypnutém hlavním vypínači stroje.
– Warning, high temperature
– Do not touch the area after the machine has been heated up.
– Pressure air supply
– Pneumatic device connection
2
PROGRAMMING MANUAL
PUB. DATE 11/02
505 556

Advertisement

Table of Contents
loading

This manual is also suitable for:

50-250c50-320c50-s

Table of Contents