CEN-TECH 32418 Operating Instructions Manual page 6

Refer to this diagram while following the directions in the Operation section.
The bold numbers inside brackets [XX] below refer to the page number where the
Continuity
Indicator [9]
Ohm Scale
[8]
Current
Gain Scale
(hFE) [9]
Leakage
Current
(lceo) Scale
[9]
Zero Adjust
[10]
DC Volt
Selection
Area [7]
DC Current
Selection
Area (mA)
[8]
-COM Jack
The Accuracy Mirror is used to insure that the meter's pointer is being read
straight, ensuring accuracy. Simply make sure that the meter is angled so that, when
reading it, the reflection of the pointer is hidden under the pointer.
SKU 32418 For technical questions, please call 1-800-444-3353.
Control and Scale Layout
explanation of the function starts.
Battery
Selection
Area [10]
The Accuracy Mirror
Continuity + Jack
Selection
Area [9]
Accuracy
Mirror [6]
Amperage/
Voltage
Scales [7]
Battery
Test Scale
[10]
Ohm Zero
Adjust [8]
AC Volt
Selection
Area [8]
Transistor
Selection
Area [9]
Ohm
Selection
Area (Ω) [8]
Page 6