Table of Contents
Advertisement
7 FUNCTION DIGITAL MULTIMETER
69096
OPERATING INSTRUCTIONS
Visit our Web site at http://www.harborfreight.com
REV 12a
Copyright
2011 by Harbor Freight Tools
. All rights reserved.
©
®
No portion of this manual or any artwork contained herein may be
reproduced in any shape or form without the express written consent of
Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CEN-TECH 69096
Summary of Contents for CEN-TECH 69096
-
Page 1: Operating Instructions
7 FUNCTION DIGITAL MULTIMETER 69096 OPERATING INSTRUCTIONS Visit our Web site at http://www.harborfreight.com REV 12a Copyright 2011 by Harbor Freight Tools . All rights reserved. © ® No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. -
Page 2: Specifications
Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Warnings continued on page 3. SKU 69096 For replacement parts, please call 1-800-444-3353. Page 2... - Page 3 Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not operate properly. SKU 69096 For replacement parts, please call 1-800-444-3353. Page 3...
- Page 4 Do not test voltage on AC circuits higher than 750 volts. Do not test voltage on DC circuits higher than 1000 volts. Do not test current on circuits higher than 10 amps. SKU 69096 For replacement parts, please call 1-800-444-3353. Page 4...
-
Page 5: Ac Voltage Measurements
Measure DC conductors carrying up to 1000 VDC. Turn the Range Selector Switch to 1000 DCV setting. Follow the directions above under “AC Voltage Measurements”, only use the DC settings instead. SKU 69096 For replacement parts, please call 1-800-444-3353. Page 5... -
Page 6: Dc Current Measurements
Plug the red Test Lead into the VΩmA (Center) Jack. Plug the black Test Lead into the Com (Bottom) Jack. Switch the Multimeter ON. Connect the red probe to the anode of the diode and the black to the cathode. SKU 69096 For replacement parts, please call 1-800-444-3353. Page 6... -
Page 7: Battery/Fuse Replacement
Pull battery/fuse out of unit and replace with the same. (9V battery or 500mA/250V fast-acting fuse) Replace cover and retighten screws. NOTE: No replacement parts are available for this tool. SKU 69096 For replacement parts, please call 1-800-444-3353. Page 7...
Need help?
Do you have a question about the 69096 and is the answer not in the manual?
Questions and answers
What setting do I use for my wall out let
To measure the voltage of a wall outlet using the CEN-TECH 69096 multimeter, set the Range Selector Switch to 750 ACV. Always start with the highest range if the voltage is unknown.
This answer is automatically generated
12 volt battery charger. blinking green light what does this mean ?