CEN-TECH 32418 Operating Instructions Manual page 11

d. Open the back cover.
e. Remove the batteries and replace
them, being sure to align the new
batteries properly. See Figure B .
f. Put the back cover on, bottom
edge first. See Figure C . Then,
retighten the screw.
8.
If the multimeter is exposed to excessive current, misused, or dropped, the fuse may
become blown. Check the fuse if the meter does not work for no apparent reason.
a. Follow directions a through d un-
der Battery Replacement to
remove the back cover.
b. Note the location of the spare fuse
holder and the fuse in Figure B .
Note: A spare fuse is not in-
cluded.
c. Carefully examine the fuse in the
meter. If the thin wire in the tube
is broken, the fuse is blown and
needs to be replaced. See Fig-
ure D .
Warning: ONLY replace the fuse
in this meter with another fast-
acting 0.5A fuse. Using the
wrong fuse or using another
material or object instead of a
fuse is very dangerous and
may cause a fire.
d. After replacing the fuse, close the
meter. Put the back cover on, bot-
tom edge first. See Figure C .
Then, retighten the screw.
SKU 32418 For technical questions, please call 1-800-444-3353.
Figure B
Fuse
Fuse Replacement
Figure D
"AA" Batteries
Figure C
Fuse
spare
fuse
holder
Page 11