Care And Maintenance - Cocraft NLT04 Original Instructions Manual

Adding distance measurements
1. Switch the distance meter on by holding in [
2. Take a measurement. The measurement will show on the display.
3. Short press [ +/- ], the measurement will move up a row on the display and a new
row will be created as the meter waits to add the next measurement.
4. Take a new measurement; the sum of the two added measurements will now
appear on the bottom row of the display.
Subtracting distance measurements
1. Switch the distance meter on by holding in [
2. Take a measurement. The measurement will show on the display.
3. Hold in [ +/- ] until the displayed measurement moves up a row on the display and
a new row is created as the meter waits to subtract the next measurement.
4. Take a new measurement, the resulting distance after the subtraction will now
appear on the bottom row of the display.
You can add or subtract several measurements in sussession by short pressing [ +/- ]
to add or holding in [ +/- ] to subtract respectively.
Memory
Press [ ] (7) repeatedly to display the 20 latest measurements.

Care and maintenance

• Clean the exterior of the distance meter by wiping it with a damp cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
• Never immerse the distance meter in water or other liquid.
• Whenever the distance meter is not to be used for an extended period,
the batteries should be removed and it should be stored in a dry, dust-free
environment, out of children's reach.
1
2
3
Calculation result
10
] until the display illuminates.
] until the display illuminates.