aqprox! APPUSB150DA User Manual page 31

• 4.3 Ad-Hoc setup for one point accomplished
• 4.4 Setup another Ad-hoc point as step 1, 2, 3 and 4.
• 4.5 Ad-hoc mode link accomplished. And you can visit each
other.
Note: To make an Ad- - - - Hoc mode Note: To make an Ad
Note: To make an Ad Note: To make an Ad
same channel. Its static IP address should be in the same netsub, same channel. Its static IP address should be in the same netsub, same channel. Its static IP address should be in the same netsub, same channel. Its static IP address should be in the same netsub,
and the SSID should be the same too. and the SSID should be the same too.
and the SSID should be the same too. and the SSID should be the same too.
5.2 WPS 5.2 WPS
5.2 WPS 5.2 WPS
WPS (Wi-Fi Protected Setup) function allows you to quickly add a
new wireless device to an existing network.
This wireless card supports Wi-Fi Protected Setup (WPS), you can
establish a wireless
connection between wireless card and router by using either Push
Button Configuration (PBC)
method or PIN method.
Hoc mode link. Do remember to choice the link. Do remember to choice the
Hoc mode Hoc mode link. Do remember to choice the link. Do remember to choice the
Figure WPS
function
Note: If you need Note: If you need
Note: If you need Note: If you need
more information more inform ation
more inform more inform ation ation
please consult the please consult the
please consult the please consult the
help Ralink WLAN help Ralink WLAN
help Ralink WLAN help Ralink WLAN
Utility. Utility. Utility. Utility.
31