Lubrication - Snapper LT2044 Operator's Manual

18.5hp & 20hp hydro tractors, 44" / 38” mower decks
Hide thumbs Also See for LT2044:
Table of Contents

Advertisement

Regular Maintenance

Lubrication

Service Interval: Every 25 Hours
Lubricate the unit at the locations shown in Figures 14-
16 as well as the lubrication points listed. Generally, all
moving metal parts should be oiled where contact is
made with other parts. Keep oil and grease off belts and
pulleys. Wipe surfaces clean before and after
lubrication.
Grease:
• steering linkage
• mower linkage
• rear axle shafts (remove wheel hubs)
• front axle pivot
Use grease fittings when present. Automotive lithium
grease is recommended.
Figure 14. Lubricate Tractor
Oil:
• foot pedal rods & brackets
• seat adjustment assembly
• draglink
• mower deck height adjustment linkage
• transmission idler assembly
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents