TrekStor DataStation Pocket Xpress User Manual page 11

1) Startup
Use the provided USB Y-connection cable to connect the DataStation to your PC. Connect both USB
A-plugs to the USB ports of your PC and then the mini-USB A-plug to the DataStation. Your operating
system will automatically recognize the DataStation, and add the DataStation as a "l
to "m "/"C
y Computer omputer
In order to ensure a convenient supply of power to the ultra-mobile DataStation pocket without having
i
to carry an external power supply unit, all DataStation pocket are delivered with a lightweigt and
space-saving USB Y-connection cable. Please always insert both USB A-plugs and make sure that your
computer or notebook offers sufficient power (500 mA) at both USB ports. Insufficient power, which may
occur when only one plug is inserted or when a passive USB hub is used, can in rare cases cause data loss
or even mechanical failure of the hard disk. TrekStor assumes no liability or warranty for damage to the
DataStation arising from insufficient power.
If only one free USB port is available in your PC or notebook, please proceed as follows:
i
1) Connect the USB plug (1) to the power supply with a
USB charger (such as a TrekStor USB charger e.f. which can be
purchased separately) or an active USB hub.
2) Next, insert the USB plug (2) for data transmission
into your PC or notebook.
3) Plug the mini-USB plug (3) into the DataStation.
" (Microsoft® Windows) or the "D
oCAl Disk
" (Mac® OS X and Linux®).
esktop
" (or "l ")
oCAl Drive
1
2
3
EN
11