Advertisement
Before cleaning or performing maintenance of your gas cooktop, you must disconnect it from the electrical
power supply (electrical outlet or battery).
To make sure your cooktop performs properly and safely for a long time, it is extremely
important to clean it carefully, thoroughly and often.
Please keep in mind the following:
● The enameled parts and the glass top must be washed with warm water without using abrasive powders
or corrosive substances which would cause damage.
● The removable parts of the burners should be washed usually with warm water and dish soap, make
sure to remove baked-on substances;
● Automatic ignition pin must be cleaned often and carefully..
● Stainless steel top plate and other SS parts should be cleaned with water/soap combo or approved SS
cleaners.
● After each use, the glass surface should be cleaned with a damp cloth to remove dust or food residue.
Glass should be cleaned regularly with warm water and mild dish soap.
● Accidental spills must be cleaned immediately to prevent further damage. If something is melted on top
the surface, it is OK to use scraper/razor blade to remove it but you must be careful not to scratch the
surface itself (Fig 1).
Do not use abrasive sponges or chemically aggressive cleaners, like oven sprays and stain removers
(Fig.2);
Lubricating the gas valves
Over the time, gas valves may become stuck, making them difficult to operate. In this case, a licensed
technician should clean the inside of valve and lubricate it.
Fig.1
Cleaning
Fig.2
6
Hide quick links:
Advertisement
